The Best Cutter For Vinyl Flooring – 2022

After hours of researching and comparing all models on the market, we find out the Best Cutter For Vinyl Flooring of 2022. Check our ranking below.

Our Picks For The Top Cutter For Vinyl Flooring


SaleBestseller No. 1
MantisTol 8.9" (227mm)Pro LVT/VCT/LVP/PVC/WPC/Rigid Core Vinyl Plank Cutter LVP-230,Best buy!
  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. You need to know that this can only cut vinyl plank, not laminate floor or wood floor!!!No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time.
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank (SPC or RVP), it is a stone-plastic composite material, which contains stone powder; it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts.
  • Straight cut, Angle cut; " L & 凵" cut and Lengthwise cut (Solve the installation of wall and corner). Clearly marked measuide. 0-45° Angle Cutting, Cutting max.depth 8mm.Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around, you will like it!
  • 2.2mm thick 9” length tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (did flooring on about 2000 square feet), Otherwise it will quickly end the service life,this is a man-made damage and is not covered by the warranty! Or replace blade.
  • Blade Cutting Width: 227 mm /8.9 inch; Angle Cutting: 0° - 45° inch 160mm wide plank; Max. Thickness Cutting: 8 mm / 0.3inch.
Bestseller No. 2
26 in. MAGNUM Soft Flooring Cutter for vinyl tile, carpet tile and more
  • Cut a square factory-clean edge on carpet, vinyl, and rubber tile
  • Fast – self-measuring wall gauge caster system
  • Accurate – Cut within 1/16 inch, with built-in ruler and adjustable fence for 45° (up to 18 in. wide) and 90° cuts
  • Made in the USA
Bestseller No. 3
MantisTol 13'' Laminate Flooring & Siding Cutter MC-330 with Installation Kit ; For Pergo, Wood, Siding, Vinyl plank and More; Best Buy!
  • For Laminate, Multi-Floor, Bamboo flooring, Parquet, solid wood, Deck-Floor-Boards, fiber-cement siding, rubber cove base, LVT, VCT, SPC, LVP, WPC, Vinyl Flooring and more, up to 13” wide and 16mm ( 5/8”) thick.
  • Sturdy high-quality steel and Heavy duty aluminum construction. 4 mm thick tungsten steel sharp blade, included a 600 Grit hone stone to keep sharp. Installation Kit with Tapping Block, Pull Bar and Spacers (With 20 Spacers)
  • If you use it for business purposes, make sure you have a spare new blade.
  • 37-1/4" Handle for increased leverage with less effort. No electricity, no dust, quick, quiet and Easy to use.
  • Item Weight 18.7 lbs, DIY For Household and Business, Strong and Durable, Preferred for business!
Bestseller No. 4
KORR KMAP001 9 inch Laminate Flooring and Siding Cutter with Heavy Duty Fixed Aluminum Fence and Built-in Precision Angled Miter Settings with BONUS Honing Stone
  • 9" cutting capacity
  • Cuts a variety of material, including laminate flooring, fiber cement board (HardiePlank , Cemplank ), engineered wood and vinyl siding up to 9” wide and 19/32” thick
  • Compact and easy to use; produces clean, precision cuts with no splintering and smooth finish
  • Sturdy high-quality steel and aluminum construction
  • Extended handle for increased leverage
SaleBestseller No. 5
Norske Tools NMAP004 13 inch Laminate Flooring & Siding Cutter with Sliding Extension Table with Bonus Floor Installation Kit Great Value
  • 13" Cutting capacity
  • Sliding extension table supports longer boards (41" Working length)
  • Cuts a variety of material, including laminate flooring, fiber cement board (HardiePlank, cemplank ), engineered wood and vinyl siding up to 13” wide and 19/32” thick
  • 28-1/2" Handle for increased leverage
  • Bonus accessory Kit includes pull bar, tapping block, 16 PVC inserts and mallet ($30 value)
Bestseller No. 6
ROBERTS - 44494 Roberts 10-25 Universal Tapping Block 2.75" x 9.25" x 0.50"
  • Gently pushes the tongue and groove or edges of resilient vinyl tile, laminate or hardwood flooring planks together creating a tight seam
  • Unique combination edge design for use with most types of flooring
  • Durable polypropylene body is built to last
  • Use with a mallet only
SaleBestseller No. 7
Norske Tools Newly Improved NMAP001 13 inch Laminate Flooring and Siding Cutter with Heavy Duty Fixed Aluminum Fence and Built-in Precision Angled Miter Settings
  • Product Type : Tools
  • Cuts A Variety Of Material, Including Laminate Flooring, Fiber Cement Board (Hardieplank , Cemplank ), Engineered Wood And Vinyl Siding Up To 13” Wide And 19/32” Thick
  • Compact And Easy To Use; Produces Clean, Precision Cuts With No Splintering And Smooth Finish
  • Sturdy High-Quality Steel And Aluminum Construction
Bestseller No. 8
MANTISTOL 13" Pro Vinyl floor cutter LVT-330 for VCT,LVT, SPC, PVC, LVP, WPC and Rigid Core Vinyl Plank. (15.4 lbs)
  • Design for cutting LVP, WPC, SPC, LVT, VCT, PVC, Vinyl Plank Flooring. Cutting unapproved materials will void warranty.
  • No dust, No noise, No electricity needed, Easy and Professional cutting vinyl floor, Save time. If you received the cutter that cuts less than 8mm thick, please remove the blade, clean the aluminum shavings in the groove, and then assemble the blade correctly in the center of the blade bar.
  • Why does the floor you cut crack? Because your floor must be Rigid Core Vinyl Plank (SPC or RVP), it is a stone-plastic composite material, which contains stone powder; it is a brittle material. Floor cracks occur when at least two or more cuts are required to make long cuts and corner cuts.
  • 13" cutting width and 8mm cutting depth. Straight cut, Angle cut; " L & 凵" cut and Lengthwise cut(Solve the installation of wall and corner).Clearly marked measuring guide. 0-45° Angle Cutting, Translational cutting,the deep of the throat is 115mm/4.5inch.Easy to use and to carry around.
  • 2.2mm thick tungsten steel sharp blade, included a 600 Grit oilstone to keep sharp.When the blade becomes dull. Must repair the sharpness of the blade (installed flooring on about 5000 sq.ft ) Otherwise it will quickly end the service life,man-made damage is not covered by the warranty.
SaleBestseller No. 9
Bullet Tools 220 20 in. EZ Shear Siding Cutter with blade for hardie plank, vinyl siding, fiber-cement siding, and trim
  • Cut Where You Work - Save time walking to and from your saw
  • One shear blade outlasts over 20 saw blades. Built in ruler and moveable fence for 45° (Up to 14 in. or 355.6 mm wide) and 90° cuts
  • Quiet Operation / No Electricity - Cut anytime day or night
  • DUST FREE cutting provides a healthier job site
  • Made in the USA
SaleBestseller No. 10
MARSHALLTOWN Ultra-Lite Flooring Cutter 13"
  • 13" Lightweight Flooring Shear


How Do You Buy The Best Cutter For Vinyl Flooring?


Do you get stressed out thinking about shopping for a great Cutter For Vinyl Flooring? Do doubts keep creeping into your mind? We understand because we’ve already gone through the whole process of researching Cutter For Vinyl Flooring, which is why we have assembled a comprehensive list of the greatest Cutter For Vinyl Flooring available in the current market. We’ve also come up with a list of questions that you probably have yourself.


We’ve done the best we can with our thoughts and recommendations, but it’s still crucial that you do thorough research on your own for Cutter For Vinyl Flooring that you consider buying. Your questions might include the following:

  • Is it worth buying an Cutter For Vinyl Flooring?
  • What benefits are there with buying an Cutter For Vinyl Flooring?
  • What factors deserve consideration when shopping for an effective Cutter For Vinyl Flooring?
  • Why is it crucial to invest in any Cutter For Vinyl Flooring, much less the best one?
  • Which Cutter For Vinyl Flooring are good in the current market?
  • Where can you find information like this about Cutter For Vinyl Flooring?

We’re convinced that you likely have far more questions than just these regarding Cutter For Vinyl Flooring, and the only real way to satisfy your need for knowledge is to get information from as many reputable online sources as you possibly can.


Potential sources can include buying guides for Cutter For Vinyl Flooring, rating websites, word-of-mouth testimonials, online forums, and product reviews. Thorough and mindful research is crucial to making sure you get your hands on the best possible Cutter For Vinyl Flooring. Make sure that you are only using trustworthy and credible websites and sources.


We provide an Cutter For Vinyl Flooring buying guide, and the information is totally objective and authentic. We employ both AI and big data in proofreading the collected information. How did we create this buying guide? We did it using a custom-created selection of algorithms that lets us manifest a top-10 list of the best available Cutter For Vinyl Flooring currently available on the market.


This technology we use to assemble our list depends on a variety of factors, including but not limited to the following:


  1. Brand Value: Every brand of Cutter For Vinyl Flooring has a value all its own. Most brands offer some sort of unique selling proposition that’s supposed to bring something different to the table than their competitors.
  2. Features: What bells and whistles matter for an Cutter For Vinyl Flooring?
  3. Specifications: How powerful they are can be measured.
  4. Product Value: his simply is how much bang for the buck you get from your Cutter For Vinyl Flooring.
  5. Customer Ratings: Number ratings grade Cutter For Vinyl Flooring objectively.
  6. Customer Reviews: Closely related to ratings, these paragraphs give you first-hand and detailed information from real-world users about their Cutter For Vinyl Flooring.
  7. Product Quality: You don’t always get what you pay for with an Cutter For Vinyl Flooring, sometimes less, and sometimes more.
  8. Product Reliability: ow sturdy and durable an Cutter For Vinyl Flooring is should be an indication of how long it will work out for you. .

We always remember that maintaining Cutter For Vinyl Flooring information to stay current is a top priority, which is why we are constantly updating our websites. Learn more about us using online sources.


If you think that anything we present here regarding Cutter For Vinyl Flooring is irrelevant, incorrect, misleading, or erroneous, then please let us know promptly! We’re here for you all the time. Contact us here . Or You can read more about us to see our vision.

Leave a Reply

Your email address will not be published.